Log In  | 0 Items for  $0 

e-Station 301DX II

$77.99  $69.89
Save: 10% off

  Specification

Operating voltage

 DC 11~18 volts

NiCd/MH

 1~15 cells

LiPoly/LiFe/LiIon

 1~6 series

 Pb

 2~20V

Charge current

 0.1 to 5.0A

Discharg current

 0.1 to 1.0A

No. of cycle

 1 to 5 times

Weight

 320g

Dimension

 113x80x28 mm

 

User's setting-up parameters

 Battery temperature cut-off

 20 to 80C or OFF

 Integral timer limit for safety

 10 to 720 min.or OFF

 Maximum charging capacity limit for safety

 10 to 9990mAh or OFF

 Key beep and buzzer sound

 ON/OFF

 Input power low alert

 10 to 11V

 LCD back-light brightness

 10 to 100 %

 

-  Operating software

   Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.

 

-  Accept various types of Lithium battery

  This charger can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

 

- Maximum safety

    Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

   Temperature limit : The temperature of the battery on charging will rise by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has been reached.

   Processing time limit : You can also restrain the maximum processing time to prevent from any possible defect.

   Input power monitor : To protect the car battery using as input power from being damaged, its voltage always being monitored under operation. If it drops below the lower limit, the process will be ended automatically.

 

-  Cyclic charging/discharging

    Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

 

-  PC based analysis using USB communication

    For technical expert, 301DX-II offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

 

- Back-light LCD screen

  You can adjust the brightness of LCD display

 

- Robust outer aluminum case

  High-quality aluminum case is durable and very efficient to cool out the internal heat

 

 

Accessories

 EAC110

 Temperature sensor cable

Optional

 EAC117

 4mm gold banana plug with silicon cable and alligator clips

Standard

 EAC300

 Program kit for PC (CD + USB cable)

Optional


Add to Cart:

  • Model: 301DX2
  • Shipping Weight: 2lbs
  • 12 Units in Stock
  • Manufactured by: Bantam


This product was added to our catalog on Wednesday 27 May, 2009.