EasyGlider PRO

Easy Glider PRO

 

The EasyGlider PRO is an updated model based on the popular and proven EasyGlider and EasyGlider electric.

Just like the larger Cularis the Easy Glider PRO can be built as a pure glider or as an electric by adding

the optional power pack. The Easy Glider Pro’s flying characteristics are perfect for the beginner, although

this by no means implies that the more advanced pilot won’t enjoy it - quite the contrary. If you are an

expert you will soon discover that the EasyGlider PRO has the kind of performance only seen with much

larger and more expensive gliders:

 

Low sink rate

Can be ballasted to expand the airspeed range

Landing aid - both ailerons raised     

Pre-fabricated molded ELAPOR® parts      

Convenient method of aileron servo connection when the wings are fitted

Two-part wing with removable spar joiner for easy transportation

 

 

Length (in) 44.5

Span (in) 71

Weight (oz) 28

Motor (optional) Himax 3516-1130

 

Can be put together in 2-3 hr, instructions are fairly easy to read and drawings help with parts placement.

Use medium CA with Kicker or Epoxy for the model and low heat hot glue for servo mounting.

Requires 2x HS-65HB or HS-55 servos for wings, and 2x HS-81 servos for elevator and rudder.

In addition we strongly recommend to get 2 x 18 inch Hitec/JR servo extensions for the wings

and 6-8 inch Hitec/JR servo extensions for the wing connection sockets.

Extensions used in wing socket connection must be of Hitec/JR brand in order to fit properly.

 

Tip: Use DU-BRO Nylon “T-style” Control Horn for the Rudder #237. The rudder has very little room for installing stock control horn.

DU-BRO # 237 works much better.

 

Works very well with Power combo:

COMBO-EZGPro-HP and a 15C 7.4V 3200-5000mAh lipo

 

WATCH VIDEO HERE