Cularis

Cularis

 

The Multiplex EasyGlider was the first step for many modelers into the world of model soaring and chasing

thermals, now we are pleased to present the Cularis.

 

Minimal cost and minimal effort, minimal risk of breakage thanks to the robust ELAPOR Foam construction.

 

Features operation with ailerons and flaps for full trailing edge camber and reflex, plus CROW

capability for accurate landings. Optional electric power set with ample power. Broad performance spectrum

with a wide speed range, including aerobatics and thermaling the Cularis can be built as a pure glider or

electric power.

 

Innovative Features

•           The mechanical retainer system engages automatically when the wings are plugged in at the same time

the servos are connected electronically, eliminating the tedious task of connecting the wing-mounted servos.

•           The all moving tail-plane is also removable with an automatic retainer system.

 

Design Features

•           Two carbon wing spars for ample strength Like the all moving tail plane, the wings can be unlocked

and removed very simply, for easy transport

•           GRP reinforcements in the fuselage and tailplane

•           Wing mounted servos covered by protective fairings

•           Polycarbonate fuselage nose reinforcement

•           All the electronic components have a predefined position in the model.

 

Length (in) 49

Span (in) 102

Weight (oz) 49

 

Recommended Motor Himax HC3522-0700

 or Motor / ESC / Prop combo Part # COMBO-CULARIS

Recommended servos 4x HS65HB or HS-55 and 2x HS-81

 

Can be put together in 3-4 hr, instructions are fairly easy to read and drawings help with parts placement.

Use medium CA with Kicker or Epoxy for the model and low heat hot glue for servo mounting.

 

Also you will need 6x 24 inch servo Hitec/JR extensions.

 

BUILD THREAD

 

WATCH VIDEO HERE